the vehicle stability control (vsc) is installed in many toyota & lexus cars, and its job is to stabilize your car if it slides in harsh climatic conditions.
when the vsc system realizes that the car is losing traction, it will automatically remove engine power for certain wheels to correct your vehicle.
the vsc has reduced tons of road accidents during rainy, foggy, and snowy weather conditions.
therefore, it is vital to check the vsc system on your toyota or lexus whenever it malfunctions.
what does the vsc light mean?
the vehicle stability control (vsc) warning light indicates there is an issue with your traction control system, and your vsc and abs will temporarily be out of function.
the vsc stands for vehicle stability control and is toyota and lexus way of handling traction control. traction control helps you keep traction by reducing the power sent to your wheels.
the vsc works with the abs. if you drive under blizzard conditions, the snow can interfere with the abs sensors, prompting the check vsc system light to turn on.
if you see the “vsc off” sign on your dashboard, it means that the traction control is shut off completely and the traction control will not work if you lose traction.
if you have a newer car you can also see the “check vsc system light” message on your dashboard instead of the vsc light.
related: bmw dsc light – causes, information, and fixes
what causes the check vsc system light?
because the vsc system is integrated with the engine control and the brake control system to control your car’s traction, there are also a lot of things that can fail.
the most common causes of a vsc light are a faulty accelerator pedal, faulty throttle body, faulty abs sensors, or a faulty mass airflow sensor.
the easiest way to find what caused your vsc light is to read the trouble code memory with a diagnostic scanner.
which models are affected?
the vsc system is toyota’s traction system. however, you will also find it in many lexus cars. here are some models with a vsc system:
- toyota camry
- toyota avensis
- toyota verso
- toyota sienna
- lexus rx400h
- lexus is250
- lexus is220d
how to reset the vsc light?
there is an easy fix to try resetting the vsc light. maybe it was just an intermittent problem causing the vsc light to come on. to reset your vsc light, try the following:
- stop your car and put the gear in park.
- locate the vsc button. it is often near the gear stick, but it can also be at your steering wheel or behind it, depending on your car model.
- press and hold the vsc button for some seconds.
- you will now see that the trac off and vsc off indicator lights will come on. both the traction and vsc system are now off.
- press the vsc button again for a second. both the trac and vsc lights will turn off, and the systems are now reengaged.
if this does not work, you need to check the trouble codes and make real 2022年世界杯淘汰赛 to find the problem. take your car to a workshop if you do not have the knowledge to do it yourself.
related: vdc light – causes & fixes
how does the vsc system work?
the vsc is the car’s internal traction control system. whenever you drive through slippery roads and lose traction, the system roars to life-giving you better steering ability. each car’s wheels will have electronic sensors that communicate with the car’s powertrain control module (pcm).
when the driver experiences steering control problems, the vsc automatically reduces engine speed while giving braking power to the wheels that need it the most.
the wheel sensors relay information about the horizontal and vertical motion of the wheels. whenever you notice the check vsc system light coming on, you could be having problems with your sensors or the steering rack.
jay
hi everyone i have a 2013 toyota venza and my dash board looks like a christmas tree has the vsc light the abs engine and track lights on scanned it a gave me a 7e8 code the only thing done was new tires and pads help me please
ardalan
hi! i have a problem with my lexus is 250 2006. check vsc pops up sometimes, not everytime.. i have run a trebleshoot to the car and the code says : c1 249. open circuit in stop light switch circuit. i have open and took out the tail lights and checked the wires and it dont seems to cause anything.. but it will come sometimes.. not everytime.. but it comes sometimes when im braking. please if you find some solutions or info, please reply me. thank you
harvey stevens
check you brake module in the trunk.
alex
i have lexus 330 2007 model the vsc light is showing and check engine please what do i do ...
freda
i changed front brakes on my lexus 2006 400h and now my vsc light is on and my abs light is on and some other lights are on
somwell
vsc light, check engine glowing 2004 lexus rx330; engine won’t start (key at acc position): my solution was to replace the car battery which had suddenly died. the abs and brake lights also lit up when i tried to crank it, but got not even a click. the store checked and confirmed i needed a replacement battery which fixed this problem. when i installed the new one the horn blasted, but it stopped after i disconnected the negative cable and retried the connection.
robberobb
might be your fuel pressure sensor which is located between the intake manifold and the firewall. try starting it using the keyfob pressed against the ignition push-to-start button. if it cranks but wont start, then you'll know.
okoh michael
i have highlander 2007 and the vsc light and traction is on. please must i get a new sensors. if i don't change it any side effect.
thanyani phaiphai
i’ve toyota corolla verso 2010 the starter does not start well the car reflects check vsc system on what must i do?
tony fowler
i have lexus 430 gs 2001 after braking and turning left slowly get loud clicking sound from abs unit turned vsc off and there is no clicking turn it on clicking again really loud please help could it be wheel sensor
robert adam
hi there, i have a 2006 lexus is 250 se-l auto. i have had a new stainless steel exhaust fitted and the wheels refurbished. i was travelling back from the garage in slough, where i had the work done, to farnham. i was almost home when the vsc light, skidding car light & engine light came on. i carefully drove back but the engine didn't go into limp mode or anything, in fact, the engine sounded fine! have i caused somthing to fail? surely it would have happened straight away when i left the garage, not when i was nearly home! any info would be greatly appreciated, thank you in adavance. with regards, rob adam.
ardalan
hi robert. i have the same issue with the same car. did you find any solutions? it comes sometimes, not everytime. when i hit the brakes sometimes it pop ups check vsc, but the engine sound great like you said. please reply thank you // ardalan
sammy arthur
i have 2006 toyota highlander and it has started giving me alarm on ....check your vsc system what do i do
safe
i've toyota corolla verso 2010 engine light come on check vsc system on i removed battery cable light turned off but next day light comes on again
laszlo gallusz
hi, i bough a toyota verso (2013) recently and after several days check vsc system turned on together with abs. in service they replaced me egr valve (424820110e), but after 250 miles driving vsc system and abs again turned on. in service they replaced the valve again, but the problem again appeared after 80 miles. my friend did a scanning clearing the signal, but after 25 miles again the lights turned on. what could be the problem? any idea? any advice? many thanks, laszlo
doriann king
can getting new tires affect the vsc
dhiraj
hi i am not sure if the tires are the problem however on my toyota avensis the vsc light started coming on & off after i had two new tire installed. it keeps coming on & off.
margie
thanks for information! help me a lot.
dia’llo
i have a 2007 lexus ls460 and the vsc light just appeared with the check engine light and a hazard light. is it safe to continue to drive the vehicle and will the vehicle break down if i don’t make it to the dealer soon?