the longer you own your vehicle, the more likely it is that you’ll run into electrical problems. while those problems usually consist of burnt bulbs and blown fuses, occasionally, they can get a bit more complicated.
don’t worry; while you’re stressed out and concerned about the cost of repairs, the answer is usually more straightforward than you think. below we break down the most common reasons your taillights don’t work, but your brake lights still do.
the most common reason why your tail lights are not working but brake lights are is due to a bad or wrong type of light bulb installed. it can also be caused by a blown fuse, bad wirings, or corroded sockets or plugs. a faulty control light switch could also be to blame.
while these are not all of the possible causes, it’s the most common ones. here is a more detailed list of the most common causes when taillights do not work, but brake lights do.
6 taillights don’t work but brake lights do causes
1. bad/wrong bulbs
brake lights typically use a dual filament bulb, and it’s possible for just one of those filaments to break. when that happens, you’ll get function out of one side of the bulb, like the brake light, but not the taillight.
furthermore, many manufactures use separate bulbs for the taillights and the brake lights. if the taillight bulb burns out, you’ll need to replace it.
finally, if you just swapped out the bulbs, the problem might be that you’re using the wrong ones. some people think that if it fits, then it’s the right bulb. that’s not true. if you still have the old bulbs check the part number and compare it to the replacement bulbs.
if you’ve already ditched the old bulbs, check your owner’s manual or google to try and find the correct bulb for your vehicle! keep in mind that the brand doesn’t matter, but the part numbers need to be cross-compatible if you’re switching brands.
2. blown fuses
while you may have a few burnt out bulbs, the more likely option is that your vehicle has a burnt-out taillight fuse. all you need to do to check is locate your vehicle’s fuse box and check the fuse with a test light or a multimeter.
if you don’t have either, you simply remove the taillight fuse and look at it. if you can’t tell if it’s burnt out, swap the fuse with another fuse with the same amperage. if the problem moves, then the fuse is the problem!
when you’re getting a new fuse, always use the correct amp fuse. it can be tempting to up the amperage to ensure that it doesn’t blow again, but too much amperage can lead to bigger problems if the fuse doesn’t protect the system like it’s supposed to!
3. faulty control switch
at home mechanics often overlook it, but it’s one of the most common reasons your taillights will stop working. the control switch in the cab of your vehicle tells your taillights when you want them on, and if the switch isn’t working the way it should, you’ll never get your taillights on!
when this part is faulty, you will most often also lose the front parking lights.
4. wiring issues/bad grounds
wiring issues are the bane of many mechanic’s existences. they can be a pain to troubleshoot and pinpoint the exact problem, but that doesn’t stop them from cropping up from time to time. broken wires crossed lines, and excessive corrosion are all common issues, especially for older vehicles.
5. corroded or damaged sockets or plugs
if your vehicle’s taillights aren’t sealing properly, then everything inside gets exposed to the elements. while this can lead to problems all over, the most vulnerable area is the socket itself. these sockets can rust and corrode when they get exposed to the elements, leading to all sorts of electrical problems.
whenever you’re replacing a bulb, you should look at the socket itself to see if it’s in good shape. if there is corrosion, use a wire brush and wd-40 to clean the socket. however, if the damage is bad enough, you’ll need to replace the socket.
6. bad ambient daylight sensor
modern cars have automatic parking lights when it is dark outside. this means that they will shut off if there is daylight. this is different in different parts of the world, but have you ensured that it is just not too light outside for your tail light to come on?
however, it can also be caused by a bad ambient light sensor, which tells the car when it should be time to light up the taillights. this sensor is often located in the front windshield and it is not very common that it will go bad.
tail light 2022年世界杯淘汰赛 guide
when you’re 2022年世界杯淘汰赛 things, you need to kiss it. not literally, of course, but you need to keep it simple stupid!
it’s occam’s razor in its simplest form; the simplest answer is usually the problem. before you start digging into wiring harnesses and checking grounds, make sure the bulbs didn’t burn out and you’re getting power!
no power usually means a blown fuse, but it could mean a faulty switch too. those three things, bulbs, fuses, and switches, make up 95% of the electrical problems associated with taillights.
even better for you, they’re also the easiest to troubleshoot and fix! however, once you’ve ruled those three things out, you can move onto the next two. first, start by checking for power at the socket, but with a known good ground.
when you’re checking for power, make sure you’re getting good contact with the metal terminal in the socket. if corrosion or anything else is covering the terminal, you’ll need to clean it off first. if you end up cleaning the terminal, try the bulb again, the problem might have been the corrosion!
but, if you’re getting power and there’s no corrosion, it’s likely a ground issue that you need to solve. if you aren’t getting power, repeat these steps at the fuse. if the fuse is getting power and the socket isn’t, you have a wiring issue between the socket and the fuse.
however, if the fuse isn’t getting power, check for power at the switch. once again, if you have power at the switch and not the fuse, the wiring fault is somewhere in between. but if you’re not getting power to the switch, then the problem is somewhere between there and the battery.
nothing is more frustrating than electrical gremlins. but with a little automotive know-how and a basic understanding of electrical principles, there’s no reason you can’t track down the reason for your faulty lights!
it might seem overwhelming at first, but most electrical issues are cheap to fix, and don’t come back if you do the job right the first time! even better for novice mechanics, they’re issues you can typically quickly troubleshoot and fix yourself!